Jing Gong g608 - G36c
Lower reciver Step 1
Lossen the small screws in the selector switches (one on each side). And pull them up. Be aware that underneath each of them are a small spring with a small (1mm) plastic nub. This nub is the one giving the clicking, when the selecter is in place.
Lower reciver Step 2
Push out the pin holding the gearbox to the lower reciver, and the big screw in the buttom of the handle. Then the gearbox (versoin 3) should just pull out. Leaving the lower reciver and gearbox seperated.
Lower reciver Step 3
Turn the metal selectors untill they come loos and remove them. Then pull out the mettal rod that connects the 2 selectors.
Lower reciver Step 4
Remove the small spring and plastic push button in the trigger well. And pull out the pinn holding the mag release in place.
Lower reciver Step 5
Then remove the mag release spring. Now you are left with a fully disassembled lower reciver.
Previous Page - Next Page