Jing Gong g608 - G36c
Barrel Sub Step 1
Push forward the hop-up and the barrel, and turn it to the point where you can pull it out of the barrel sub assembly. Leaving you with the front and barrel seperated.
Barrel Sub Step 2
Remove the 2 screws in the front, and detach the flame hider by loosening the screw. Also remove the elektric safety so it don't break.
Barrel Sub Step 3
The front of the plastic part should be able to split open enough to pull the metal part down. This eksposes the wiring, giving you acces to the last part of the gun.
Hop-up Step 1
remove the spring from the barrel. Then using a small screw driver, pop out the small retaining plastic peace, holding the barrel and unit together.
Hop-up Step 2
Pull out the turning part (that you use to ajust the hop-up), and dont loos the small plastic peace underneath. Then pull out the barrel and rubber.
Done.
Thats it. If you followed all the instructions you should now have a gearbox and all the gun peaces seperated. Checkout the Gearbox disassembly for a step by step guide to disassemble a version 3 gearbox.
I Recomend the folowing mods for this gun:
Barrel Stabilization, Air sealing, O-Ring Expansion, Electric system
Previous Page