Jing Gong g608 - G36c
Upper reciver Step 1
After having removed the magwell and lower reciver, remove the 4 screws in the front. Also remove the 3 screws holding the top rail. Push the rail back to remove it.
Upper reciver Step 2
Turn the gun over and remove the small screw holding the right side in place. Then with a small screw driver pry the right side cover plade free of the rest. It's at this point hold in place only by small plastic rods so be jentel so you don't break them.
Upper reciver Step 3
Remove the budstock holder. Then take out the barrel sub-assembly buy pulling it forward.
Upper reciver Step 4
Turn the gun over and remove the 2 screws honding the mettal "hop-up cover plate" to the rettracter arm.
Upper reciver Step 5
Remove the 2 screws holding on the left side cover plate. And now the Upper reciver has been fully disassembled.
Previous Page - Next Page